
You can build your shed with a simple post and beam framework. You can even use wood that you collect from around your property. When you are planning the walls, you should get about five posts that will go into the ground. This will give you four posts on the side and one post in the middle of the front. Your wood shed will only have three walls as the front wall will be wide open to allow for easier access. As a result, make sure that your wood shed opening faces away from where the wind usually comes from. If the shed is shielded a few feet away by trees, then you will be able to keep a lot of rain and snow out of the front.

In your wood shed plans, you do not need any studs. The posts will be all you need and then you simply nail some boards up for the walls. You also do not need a foundation because the wood is just going to rest on the ground. When you are planning the roof, you will want it to slope backwards. For this reason, the two front corner posts, and the post in the middle of the opening will be slightly higher than the posts in the back. Then, attach boards along the sides and front, and put up wood on the top allowing for the slope. This will keep water from pooling on the top.
Lastly, in your planning, look to have some sort of moisture barrier over your entire wood shed. A simple sheet of plastic over the top can do this. It will keep the moisture off the roof and it will keep the wood dry. You can also put plastic sheeting over the front of the wood shed so that everything stays dry if there is a snowstorm.
No comments:
Post a Comment